Boom Lift License Kitchener

Boom Lift License Kitchener - Only fully licensed individuals should operate an aerial boom lift. Qualification can be attained through a combination of classroom sessions and practical training with the specific type of aerial lift that will be used on the job. A License is required for anyone who operates or works on an aerial boom lift.

Vehicle-mounted aerial devices comprise the following work vehicles: aerial ladders, extensible boom platforms, vertical towers, articulating boom platforms, and any combination of these kinds.

There are a number of basic safety rules which apply to all boom lifts. Worker safety while in the basket is a top priority. Workers should put on a body harness and lanyard attached to the basket or boom. Never tie off to a structure, equipment or an adjacent pole. Personnel must stand on the floor of the basket, and never sit or climb on the edge of the basket. The load restrictions of the manufacturer must be followed.

Lift operators must be authorized to operate an aerial lift. The manufacturer's manual should be kept within the lift and the operator should be familiar with all aspects of that specific unit. Operators are responsible for making certain that safety measures are followed in operating the lift. Testing lift controls each day must be done. Set brakes and position outriggers (if they are utilized) on pads or a stable surface. If working on a slope, use wheel chocks.

Never move an aerial lift truck with an elevated boom whilst employees are within the basket. Extensible boom platforms and articulating boom utilized as employees carriers must have accessible, plainly marked, upper controls. Except for in emergency cases, lower controls should not be utilized to override upper controls unless the person inside the lift gives consent.

While working from an aerial lift, do not wear pole or tree climbers.
Do not alter the insulated part of the aerial lift.
Make certain that the booms are thoroughly checked, that the machine is properly cradled and the outriggers are in the stowed position before moving.
When operating a boom lift next to power lines, make sure that the lines are di-electrically tested based on local regulations.

Click to Download the pdf