Forklift Training Schools Kitchener

Forklift Training Schools Kitchener - What Are Included In Our Forklift Training Schools

If you are searching for a job as a forklift operator, our regulatory-compliant lift truck training Schools provide exceptional instruction in numerous styles and types of lift trucks, lessons on pre-shift inspection, fuel types and handling of fuels, and safe operation of a forklift. Hands-on, practical training assists individuals participating in obtaining fundamental operational skills. Course content comprises existing rules governing the operation of forklifts. Our proven forklift Schools are intended to offer training on these types of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

Do not raise or lower the fork while the lift truck is traveling. A load must not extend higher than the backrest due to the danger of the load sliding back toward the operator. Inspect for overhead obstacles and ensure there is plenty of clearance prior to lifting a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

When the load is raised the lift truck would be less stable. Make sure that no pedestrians cross under the elevated fork. The operator should never leave the forklift when the load is lifted.

When handling pallets, forks should be high and level enough to go into the pallet and extend all the way below the load. The width of the forks must provide even weight distribution.

Chock the wheels and set the brakes prior to unloading and loading the truck. The floors must be strong enough to support the combined weight of the forklift and its load. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The height of the entrance door should clear the height of the forklift by a minimum of 5 cm. Edges of ramps, docks and rail cars must be marked and avoid them.

Click to Download the pdf