Pallet Stackers

Pallet Stackers Training Kitchener - Pallet stackers are a style of pallet jack that can be utilized to stack, transfer and haul merchandise placed on a pallet that are far too heavy for manual lifting. Mainly these mechanisms are employed to load and unload freight from trucks and to move pallets from one site to another within a stockroom of storeroom space. Most pallet jacks are manufactured of heavy duty materials to endure extreme weights. Pallet stackers are occasionally called pallet jacks. They may be operated from a seated, upright or walk-behind position. Pallet jacks are divided into manual and powered types.

Certain basic parts comprise the pallet jack. There are forks that slide beneath a pallet, capable of moving and raising it to a desired height. The motor section or casing houses the gas-run, electronic or hydraulic apparatus that powers the instrument.

Manual pallet jacks are hand-powered. They run hydraulically to make hauling tedious pallets an easier task. Typically a walk-behind model meaning they are operated by pulling and pushing the jack to its desired location. Utilizing a foot pedal or handle raises the stacker's forks. Squeezing a lever or trigger returns the forks to the floor. These models of pallet jacks are ideal for lighter loads of up to approximately 1 ton or 907.18 kg.

Electric or gas driven pallet jacks can accommodate extreme lifting weights of up to 5 tons or 4535.92 kg. They are physically less demanding than the manual designs thanks to the automated power to lift and lower the stacker's forks. These styles are steered by rotating the handle in a particular direction. There is a button on the handle that operates to lift and lower the forks. A throttle set up on the stacker's handle moves the device forward and in reverse. This type of equipment is generally referred to as a lift truck and is used from a sit-down posture.

As the fork width, load limit and lift height fluctuate dramatically between separate versions, choosing the correct pallet stacker to suit the job is vital. Some stacker's lift height may allow multiple pallets to be stacked, while others might only allow two at a time. Certain types of these hoists include an changeable fork so as to permit the stacker to slide underneath pallets of atypical sizes and shapes. These models are helpful when a mixture of types of pallets are common within a workspace.

Click to Download the pdf