
Forklift Training Programs Kitchener - Are you searching for a job as a driver of a forklift? Our regulatory-compliant mobile equipment operator training provides instruction in types of lift trucks, pre-shift inspection, fuel types and handling of fuels, and safe operation of a lift truck. Hands-on, practical training helps individuals participating in obtaining basic operational skills. Program content covers existing regulations governing the utilization of forklifts. Our proven forklift programs are meant to provide training on these kinds of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.
How to Safely Handle Loads
While the lift truck is in use, do not lower or raise the forks. Loads must not extend above the backrest. This is due to the risk of the load sliding back towards the operator. Inspect for overhead obstacles and make sure there is enough clearance before lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.
When the load is lifted the lift truck will be less steady. Make certain that no pedestrians cross below the elevated fork. The operator must not leave the forklift while the load is raised.
The forks must be level when handling pallets, and high enough to extend all the way into and underneath the load. The fork's width should provide even weight distribution.
Prior to loading or unloading the truck, chock the wheels and set the brakes. Floors need to be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed in order to support a semi-trailer that is not coupled to a tractor. The entrance door height should clear the height of the forklift by at least 5 cm. Mark edges of ramps, docks or rail cars and avoid them.
Do not stay in a lift truck for long periods without proper ventilation. The interior of the truck must be well lighted and free of trash, loose objects and obstructions. Check for holes in the floor. The installation of nonslip material on the floor will help avoid slipping. Clear any obstacles from docks and dockplates and ensure surfaces are not oily or wet.
Never push or tow other vehicles with a lift truck.