Forklift Training Course Kitchener

Forklift Training Course Kitchener - Industry and federal regulators have established the criteria for forklift safety training according to their current standards and regulations. Individuals wishing to operate a forklift must complete a forklift training course prior to utilizing one of these machinery. The accredited Forklift Operator Training Program is intended to offer individuals training with the practical skills and information to become a forklift operator.

There are forklift operation safety regulations that should be followed pertaining to pre-shift inspections, and regulations for loading and lifting.

An inspection checklist must be completed and given to the supervising authority prior to starting a shift. When a maintenance problem is uncovered, the utilization of the specific machine should be discontinued until the issue has been addressed. To indicate the machinery is out of order, the keys must be removed from the ignition and a warning tag placed in a visible place.

Safety regulations for loading will comprise checking the forklift's load rating capacity to determine how much the machinery can handle. When starting the machine, the forks must be in the down position. Remember that there is a loss of approximately 100 pounds carrying capacity for every one inch further away from the carriage that the load is carried.

To safely lift a palletized load, drive the forklift toward the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Raise the forks to one inch beneath the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to alert other personnel. Do not allow forks to drag on the ground.

Forklift loads should be loaded in such a way that they are secure and do not create a hazard to other objects or people. Restraining loads is needed for materials which might shift during transport and destabilize the forklift.

Drums can be strapped together so as to prevent movement and shifting of the drums. Forklift operators should drive slowly when moving liquids, to reduce instability in the forklift.

Click to Download the pdf